People who want to fix up their insulation in 2025 have choices to make. Like, there are these two big ones everyone talks about fiberglass and blown-in stuff for attics. Both work good for houses, businesses, and farms too. We’re gonna look at what’s good and bad about each one, so you can pick the right one for wherever you need it.
What is Fiberglass Insulation?
They make fiberglass by spinning glass into something that looks like wool. You can get it in these big rolls or batts, or even all loose and stuff. It stops heat from moving around, which is what you want insulation to do. Been around forever, and it doesn’t burn either, which makes it extra safe.
Money-wise, fiberglass ain’t gonna break the bank when you first buy it. That’s why lots of people still uses it in their homes and businesses. It works pretty well at keeping the temperature steady, with them R-values between 2.2 and 4.3 per inch, but you gotta put it in just right or you’ll get gaps that mess everything up.
What is Blown-in Attic Insulation?
Blown-in insulation is when they takes loose stuff (could be fiberglass or cellulose) and blows it everywhere with this special machine. Gets in all them little corners and spots you can’t reach good. Works real nice in attics that got weird shapes or stuff in the way.
When you put this kind in, it covers everything so good that barely any air gets through where it shouldn’t. Goes in pretty quick too, but you need someone who knows what they’re doing with that special equipment. If you get the cellulose kind, it’s good for the earth and all, but you gotta watch out for it getting wet.
Comparing Fiberglass and Blown-in Attic Insulation
Both these kinds of insulation does different things good. Fiberglass works okay unless it gets super hot or cold and somebody didn’t put it in right. That blown-in attic insulation stuff though, it gets in everywhere real nice, and if you get cellulose, it keeps heat in super good – up to 3.7 per inch on them R-value things.
Putting in fiberglass takes more time ’cause you gotta cut it perfect, but it ain’t rocket science. Blown-in needs them special machines and people who know how to use them. Both got their problems with wet stuff – fiberglass might grow mold if it gets wet, and cellulose can soak up water like nobody’s business.
These insulations last different too. Fiberglass mostly stays how it is, except sometimes it starts hanging down after a while. Blown-in kinda shrinks down over time, which ain’t great for how good it works. Both pretty good for the earth though – fiberglass uses old glass they recycled, and cellulose is just old paper they made new again.
Ideal Applications for Each Insulation Type
Fiberglass works best where everything’s nice and straight – like normal attics in houses or them flat ceilings in stores. Don’t cost much neither, so homeowners and businesses both like it. Even them farm buildings can use it good ’cause it’s cheap but still keeps the heat where it should be.
That blown-in stuff really shines when you got weird spaces or can’t reach good in some spots. Real good for them old houses where you wanna add insulation but don’t wanna tear everything apart. If you’re real serious about saving energy, blown-in’s your best bet ’cause it gets in everywhere and stops air from sneaking through.
Innovations in Insulation for 2025
They’re always coming up with new stuff for insulation these days. Both fiberglass and blown-in are getting better – like holding more heat and using more earth-friendly materials. Now they’re putting recycled stuff in pretty much everything, which helps out the planet and all.
Safety’s getting better too. These new insulations fight off fire better and keep the bugs out more than the old stuff did. Makes both kinds work better for houses, businesses, and them farm buildings too. Everything’s just getting more reliable, you know?
How Foam Worx Insulation Can Help
Here at Foam Worx Insulation, we know our stuff when it comes to putting in insulation. We help out everybody – people with houses, business owners, and farmers too, all around Scott County, Olmsted County, and nearby places. Whether you got an old building needs fixing up or you’re building something new, we’ll make sure you get your money’s worth.
We do it all – fiberglass, blown-in, and that fancy closed-cell spray foam stuff too. Been doing this for years, so we know how tough Minnesota weather can be. We make sure your place stays warm, your bills stay low, and your air stays clean. That’s just how we do things at Foam Worx Insulation.
Upgrade Your Insulation Today
Want your place to feel better and save some money? Foam Worx Insulation can help with that. We’ll help you figure out what’s best for your 2025 project. Give us a ring at (507) 407-6688, shoot us an email at [email protected], or take a look at foamworxinsulation.com. Don’t wait around – get your place fixed up right now.
FAQs
How long does fiberglass insulation last?
If you take care of it right, it’ll keep working good for 20-30 years.
Is blown-in insulation good for old houses?
Sure is – works real nice when you’re fixing up old places.
Can insulation make things quieter?
Both kinds help keep noise down and make rooms sound better.
How do I know if my attic needs more insulation?
Watch out for rooms that ain’t the same temperature, high heating bills, and spots where you can see through the insulation.
